Upright anchor navy button

johnkris

Corporal
Joined
Oct 23, 2023
It's tinback and looks newish but it has a style Alberts identifies as pre Civil War. Any info is helpful.

upright anchor navy button (2).webp
 
If your measurement of 12.7mm is correct then it's two small to be a jacket button. It's most likely a cuff button.

I believe your button is a 1840's - 1850's US Navy cuff button.

View attachment 592619
If your measurement of 12.7mm is correct then it's two small to be a jacket button. It's most likely a cuff button.

I believe your button is a 1840's - 1850's US Navy cuff button.

View attachment 592619
Yeah. it's a cuff or cap button. And the design is 1840s to 1850s US Navy. It could just be a well kept gilded button. The back is old. Never seen a repro with a back like that.
 
The tinned iron backs and unsoldered wire shanks are not typical of 1840's to 1850's construction. But these buttons are relatively common. My belief is that they are later 1800's cap buttons not used by the Navy but mimicking the earlier Navy design, perhaps for civilian (yachting) or commercial (steamship) use.
 

Learn About Us
►About CivilWarTalk
►Contact the Webmaster
►Meet the Staff
►Link to CivilWarTalk
Join Our Community
►Register
►Browse Forums
►View Today's Discussions
►Search the Forum
Get Help
►FAQ
►Student Guide
►Forum Rules & Etiquette
►Copyright / DMCA

     Contact Us CivilwarTalk on Facebook CivilWarTalk on YouTube CivilWarTalk on Twitter RSS Feed

Bringing the American Civil War and More to Life.
© 1999 - , CIVILWARTALK, LLC - Site Version 10.0

SlaveryTalk.com - SecessionTalk.com - CivilWarTalk.com - ReconstructionTalk.com
Back
Top