A very nice Enfield with a distracting hand lettered SHC mark on top of the barrel. Any markings on the wood?
It is suppose to be the mark of Sinclair Hamilton & Co but it is not original.Is that a SHG or SHC? Things that stood out to me, the hole in the rear sight, never seen that before. Also the rammer might be period, but not correct for musket. Seems to be in pretty good condition, no pitting on the lock or barrel around the nipple. Nice clear stamps.
Thanks. What's the chances of finding a period correct ramrod?Is that a SHG or SHC? Things that stood out to me, the hole in the rear sight, never seen that before. Also the rammer might be period, but not correct for musket. Seems to be in pretty good condition, no pitting on the lock or barrel around the nipple. Nice clear stamps.
Will do. ThanksInteresting Enfield. Look under by the trigger guard and see if there are any markings.
ThanksIs that a SHG or SHC? Things that stood out to me, the hole in the rear sight, never seen that before. Also the rammer might be period, but not correct for musket. Seems to be in pretty good condition, no pitting on the lock or barrel around the nipple. Nice clear stamps.
ThanksIt is suppose to be the mark of Sinclair Hamilton & Co but it is not original.
Gunderson Militaria.Thanks. What's the chances of finding a period correct ramrod?
It was only later that the English adopted the American "Mass Production" system and because the Enfields were basically hand fitted replacing parts sometimes becomes problematic. I've often told someone looking for an Enfield bayonet for their rifle that they needed to have the weapon with them in order to get a bayonet that actually fits.It is a Union rifle. The Birmingham proof with 24 24 means the barrel was made from scratch as .58". The ramrod is not correct, probably one from a Springfield, but as others have stated, they often got 'swapped' on battlefields. It is missing the backsight spring too (the 'hole' is for the screw). Most SHC stamp marks were applied to the wood, not the metal.
The majority of these guns were not 'made' by the gunmaker but by other gunmakers and assembled for the gunmaker hence the difficulties in interchanging parts. Taking the barrel off and looking underneath may well reveal the barrel-maker. and the stock-maker would be found in the barrel space or even in the ramrod channel. The lock-makers name would be on the backof the lock plate. Most of these union guns were sold as surplus after the war and often 'sporterised'.
All good choices. Also check out Civil War relic shows if there are any nearby. There are usually vendors that have some for sale. If you bring your musket with you can make sure it fits properly in the ramrod channel. You might even be able to trade the Springfield ramrod at one of these shows to offset the cost.Gunderson Militaria.
Lodgewood Mfg
Dixie Gun Works.
I'm sure others can help.
Nice Enfield, good luck in your search for a ramrod.
We're there different variations on this SHC mark and where can I find examples of them?It is suppose to be the mark of Sinclair Hamilton & Co but it is not original.
Thanks
Thanks for the information.Gunderson Militaria.
Lodgewood Mfg
Dixie Gun Works.
I'm sure others can help.
Nice Enfield, good luck in your search for a ramrod.
Great idea. ThanksAll good choices. Also check out Civil War relic shows if there are any nearby. There are usually vendors that have some for sale. If you bring your musket with you can make sure it fits properly in the ramrod channel. You might even be able to trade the Springfield ramrod at one of these shows to offset the cost.
It was the civilian gunmakers that caused the interchangability problem rather than Enfield. Enfield, knowing the problems with the sub-contracting system, began producing by 'the American System' - mass production to a standard interchangeable pattern - around 1853. They began stopping the sub-contracting gradually soon afterwards, but did not achieve full production until around 1858. It was what the P1853 rifle was designed for! The only other approved manufacturer for government contracts was the London Armoury Company (1856) who matched Enfield standards in equipment and manufacture and, some time later, Birmingham Small Arms and LACs successor, London Small Arms Ltd.It was only later that the English adopted the American "Mass Production" system and because the Enfields were basically hand fitted replacing parts sometimes becomes problematic. I've often told someone looking for an Enfield bayonet for their rifle that they needed to have the weapon with them in order to get a bayonet that actually fits.
The caliber is the US standard caliber of .58, or as marked in the British measurement, 24 bore.It is a Union rifle. The Birmingham proof with 24 24 means the barrel was made from scratch as .58". The ramrod is not correct, probably one from a Springfield, but as others have stated, they often got 'swapped' on battlefields. It is missing the backsight spring too (the 'hole' is for the screw). Most SHC stamp marks were applied to the wood, not the metal.
The majority of these guns were not 'made' by the gunmaker but by other gunmakers and assembled for the gunmaker hence the difficulties in interchanging parts. Taking the barrel off and looking underneath may well reveal the barrel-maker. and the stock-maker would be found in the barrel space or even in the ramrod channel. The lock-makers name would be on the backof the lock plate. Most of these union guns were sold as surplus after the war and often 'sporterised'.
Interesting. ThanksIt was only later that the English adopted the American "Mass Production" system and because the Enfields were basically hand fitted replacing parts sometimes becomes problematic. I've often told someone looking for an Enfield bayonet for their rifle that they needed to have the weapon with them in order to get a bayonet that actually fits.