Tower Enfield

Tower69

Cadet
Joined
Jun 6, 2024
I picked up this

E96210A7-234E-4FF7-B9B6-B6E8CDA78AC9.jpeg


B7D9BF42-F6C8-444A-AF6B-3BAFC16BB743.jpeg


CFC59851-D012-482C-9D92-73614C5CAF7C.jpeg


435053F8-D658-4969-B585-AA1896D44E34.jpeg


F5D75FDD-A70C-4E5E-89B4-A0D17FF305B0.jpeg


05702973-4E6C-434E-A456-E7A4B9CE3B4E.jpeg


B54CF78D-179D-447F-9370-F0C64ED8F8F3.jpeg


573A7477-449C-4D23-A1F3-A31A00734401.jpeg
 
A very nice Enfield with a distracting hand lettered SHC mark on top of the barrel. Any markings on the wood?

I owned one of these similarly marked model 1853s once. Mine was also 24 bore. It has a Sinclair Hamilton marking on the belly of the stock, just back of the trigger guard, consisting of a crown over SH over C stamped into the wood.
It also had a partial metal stamped SHC in an oval border on the top of the barrel, with an S on top, and only the C visible below - the side which would have had the H was weak and no H visible.

My gun had been a movie gun, marked WCCo for Western Costume Company, and an MGM marking - it was in the sales catalog for the great MGM studio prop sale of some decades ago. Mine is pictured in in The English Connection - and you'll see in that same reference a photo of the proofmark area, with no discussion of the the WWCo and the MGM markings are?

I will post some photos of it.

See how the S and the C are both pretty crude on the one I had, just as is the one posted here. I do think the H on the one posted here was added later or a weak mark deepened.

shc.jpg


shcmetal.jpg


WCCo.jpg


MGM_6.jpg


mgmsight.jpg
 
Last edited:
Is that a SHG or SHC? Things that stood out to me, the hole in the rear sight, never seen that before. Also the rammer might be period, but not correct for musket. Seems to be in pretty good condition, no pitting on the lock or barrel around the nipple. Nice clear stamps.
 
Is that a SHG or SHC? Things that stood out to me, the hole in the rear sight, never seen that before. Also the rammer might be period, but not correct for musket. Seems to be in pretty good condition, no pitting on the lock or barrel around the nipple. Nice clear stamps.
It is suppose to be the mark of Sinclair Hamilton & Co but it is not original.
 
Is that a SHG or SHC? Things that stood out to me, the hole in the rear sight, never seen that before. Also the rammer might be period, but not correct for musket. Seems to be in pretty good condition, no pitting on the lock or barrel around the nipple. Nice clear stamps.
Thanks. What's the chances of finding a period correct ramrod?
 
Is that a SHG or SHC? Things that stood out to me, the hole in the rear sight, never seen that before. Also the rammer might be period, but not correct for musket. Seems to be in pretty good condition, no pitting on the lock or barrel around the nipple. Nice clear stamps.
Thanks
 
It is a Union rifle. The Birmingham proof with 24 24 means the barrel was made from scratch as .58". The ramrod is not correct, probably one from a Springfield, but as others have stated, they often got 'swapped' on battlefields. It is missing the backsight spring too (the 'hole' is for the screw). Most SHC stamp marks were applied to the wood, not the metal.
The majority of these guns were not 'made' by the gunmaker but by other gunmakers and assembled for the gunmaker hence the difficulties in interchanging parts. Taking the barrel off and looking underneath may well reveal the barrel-maker. and the stock-maker would be found in the barrel space or even in the ramrod channel. The lock-makers name would be on the backof the lock plate. Most of these union guns were sold as surplus after the war and often 'sporterised'.
 
It is a Union rifle. The Birmingham proof with 24 24 means the barrel was made from scratch as .58". The ramrod is not correct, probably one from a Springfield, but as others have stated, they often got 'swapped' on battlefields. It is missing the backsight spring too (the 'hole' is for the screw). Most SHC stamp marks were applied to the wood, not the metal.
The majority of these guns were not 'made' by the gunmaker but by other gunmakers and assembled for the gunmaker hence the difficulties in interchanging parts. Taking the barrel off and looking underneath may well reveal the barrel-maker. and the stock-maker would be found in the barrel space or even in the ramrod channel. The lock-makers name would be on the backof the lock plate. Most of these union guns were sold as surplus after the war and often 'sporterised'.
It was only later that the English adopted the American "Mass Production" system and because the Enfields were basically hand fitted replacing parts sometimes becomes problematic. I've often told someone looking for an Enfield bayonet for their rifle that they needed to have the weapon with them in order to get a bayonet that actually fits.
 
Gunderson Militaria.

Lodgewood Mfg

Dixie Gun Works.

I'm sure others can help.

Nice Enfield, good luck in your search for a ramrod.
All good choices. Also check out Civil War relic shows if there are any nearby. There are usually vendors that have some for sale. If you bring your musket with you can make sure it fits properly in the ramrod channel. You might even be able to trade the Springfield ramrod at one of these shows to offset the cost.
 
It was only later that the English adopted the American "Mass Production" system and because the Enfields were basically hand fitted replacing parts sometimes becomes problematic. I've often told someone looking for an Enfield bayonet for their rifle that they needed to have the weapon with them in order to get a bayonet that actually fits.
It was the civilian gunmakers that caused the interchangability problem rather than Enfield. Enfield, knowing the problems with the sub-contracting system, began producing by 'the American System' - mass production to a standard interchangeable pattern - around 1853. They began stopping the sub-contracting gradually soon afterwards, but did not achieve full production until around 1858. It was what the P1853 rifle was designed for! The only other approved manufacturer for government contracts was the London Armoury Company (1856) who matched Enfield standards in equipment and manufacture and, some time later, Birmingham Small Arms and LACs successor, London Small Arms Ltd.

The advent of the Volunteer movement in 1859 saved the gunmakers as Enfield could not supply the required rifles and they often bought them themselves, as the alternative was the Class 2 rifles (older Type 1 and 2 non-interchangeable rifles often with heavy use) released by Enfield's new production. The Civil War was another factor that saved the gunmakers from bankruptcy. The result was a reorganisation of gunmaking in Britain with the formation of the Birmingham Small Arms Trade in 1853 followed by Birmingham Small Arms Limited in 1861. They did not start production until 1863 and took some time to build to the same pattern and quality as Enfield.
(London Armoury did not supply the Confederacy until after they had finished an Enfield contract and problems with remuneration forced bankruptcy in 1866. London Small Arms bought up the factory and machinery the same year!)


Since no government weapons were provided during the Civil War, all the guns and edged weapons supplied were from these civilian gunmakers and suppliers and, as a result, many were not to 'Enfield standard', hence the reputation in the USA. Some were VERY good, but most were not.
 
There are 'thick ramrod" Model 1853s and "thin ramrod" Model 1853s, so you want to check that fit.

Here are the five Sinclair Hamilton markings of which I am aware. The photos are my photos taken over the years.

The stamps in the wood are:
  • Crown over SH over G_ (there is a number on that _ line)
  • Crown over SH over C
  • crown over S over HC over an arrow
  • I owned one with two stamps of S over HC, no crown (I don't find a photo of this handy)
  • S over HC in an oval, usually seen in metal on top of barrel

SHG3 on comb.jpg


SHC Double on Moxham.JPG


SHC Arrow double Maybury.jpg


shcmetal.jpg
 
It is a Union rifle. The Birmingham proof with 24 24 means the barrel was made from scratch as .58". The ramrod is not correct, probably one from a Springfield, but as others have stated, they often got 'swapped' on battlefields. It is missing the backsight spring too (the 'hole' is for the screw). Most SHC stamp marks were applied to the wood, not the metal.
The majority of these guns were not 'made' by the gunmaker but by other gunmakers and assembled for the gunmaker hence the difficulties in interchanging parts. Taking the barrel off and looking underneath may well reveal the barrel-maker. and the stock-maker would be found in the barrel space or even in the ramrod channel. The lock-makers name would be on the backof the lock plate. Most of these union guns were sold as surplus after the war and often 'sporterised'.
The caliber is the US standard caliber of .58, or as marked in the British measurement, 24 bore.
But the fact that the barrel is 24 bore does not mean that the gun was actually made on contract for a Union buyer or was actually sold to the Union.

My in-laws were house builders for decades, and some houses they built on contract with the buyer who paid them as they built ("contract homes"), and some houses they built with their own money on the speculation that a buyer who would appear ("spec homes").

When they needed arms, both North and South would take usable guns in either caliber if that was what was available. The Birmingham gunmakers, whether they knew it or now, were in the last golden era of market for hand fitted arms, and they found a ready buyer for whatever they could put together.

The confederate viewer marks of Sinclair Hamilton on a gun of 24 caliber would show it was inspected for confederate purchase.
 
Last edited:
It was only later that the English adopted the American "Mass Production" system and because the Enfields were basically hand fitted replacing parts sometimes becomes problematic. I've often told someone looking for an Enfield bayonet for their rifle that they needed to have the weapon with them in order to get a bayonet that actually fits.
Interesting. Thanks
 

Learn About Us
►About CivilWarTalk
►Contact the Webmaster
►Meet the Staff
►Link to CivilWarTalk
Join Our Community
►Register
►Browse Forums
►View Today's Discussions
►Search the Forum
Get Help
►FAQ
►Student Guide
►Forum Rules & Etiquette
►Copyright / DMCA

     Contact Us CivilwarTalk on Facebook CivilWarTalk on YouTube CivilWarTalk on Twitter RSS Feed

Bringing the American Civil War and More to Life.
© 1999 - , CIVILWARTALK, LLC - Site Version 10.0

SlaveryTalk.com - SecessionTalk.com - CivilWarTalk.com - ReconstructionTalk.com
Back
Top