Breach Plug Removal

In brief you will need a breech plug wrench (S&S Firearms carries these,www.ssfirearms.com) and a vice whose jaws have been covered with a material which will aid in gripping the barrell and also protecting the barrell from scarring. Be sure to use a cold chisel to mark the location of where the breech plug and barrell mate before separating so they can be rejoined to the exact spot they were in prior to them being separated. When rejoining you can add a dab of high temperature loctite so that if you ever need to perform this again, the task is much easier. Hope this helps a little.
 
I asked about the drum without having the firearm in hand, my screw up. The picture is about right but not the same markings on the left side by the breach.
 
HTML:
The "AA" in the square in the linked photo means the "Zouave" was made in 1975. If you can give me the code on the side of yours I may be able to tell you how old it is.

Jobe

I'll get that info to you Monday, Thanks in advance.
 

Learn About Us
►About CivilWarTalk
►Contact the Webmaster
►Meet the Staff
►Link to CivilWarTalk
Join Our Community
►Register
►Browse Forums
►View Today's Discussions
►Search the Forum
Get Help
►FAQ
►Student Guide
►Forum Rules & Etiquette
►Copyright / DMCA

     Contact Us CivilwarTalk on Facebook CivilWarTalk on YouTube CivilWarTalk on Twitter RSS Feed

Bringing the American Civil War and More to Life.
© 1999 - , CIVILWARTALK, LLC - Site Version 10.0

SlaveryTalk.com - SecessionTalk.com - CivilWarTalk.com - ReconstructionTalk.com
Back
Top