Dear Dashingwave1864:
"Arms back then were hand made and there was no interchangeability like in modern guns. You couldn't have 10 different factories back then producing gun parts for a gun co. to assemble into a gun. That slowed down the manufacturing process..."
In actual fact, the process of manufacturing arms by machine tools that had fully interchangeable parts was developed and perfected by John Hall at the "Rifle Works" at Harpers Ferry in the 1820's and 1830's. Under the Militia Act of 1808, the arms manufactured at the two National Armories of Harpers Ferry and Springfield were reserved for issue to ONLY the regular army and navy.
Identical arms made by contractors were reserved for issue to the various state militias. Hence, legally the fully interchangeable Hall Rifles manufactured at Harpers Ferry could not be issued to the state militias. So a contractor by the name of North signed a contract with the U.S.Army Ordnance Department to to manufacture Hall Rifles. All of the North manufactured Hall Rifles were reserved by the Ordnance Department for issue to the state militias.
Under the terms of the contract, the Hall Rifles manufactured by North had to be fully interchangeable with not only the rifles manufactured in his factory, but had to be fully interchangeable with the Hall Rifles manufactured at Harpers Ferry.
So, by the early 1830's North was delivering machine made "fully interchangeable" Hall Rifles to the Ordnance Department.
In compliance with the Militia Act of 1808, the Ordnance Department developed a formula so every year, depending on the number of men enrolled in the various state militias, an annual supply of arms were delivered to the states at no cost to the states. Depending on what the state governors requested, these arms could consist of: artillery batteries, cavalry arms (pistols, sabers and carbines) or infantry arms (stands of infantry muskets) or a mix of the aforementioned arms.
When the U.S. Model 1842 Smoothbore Musket went into production at Harpers Ferry and Springfield in the early 1840's all of the parts for those muskets were machine made and fully interchangeable. Generally for arms to be fully interchangeable, the tolerances must be held to 1/3000ths of an Inch or less.
In Europe the machine manufacture of fully interchangeable arms was known as "The American System." In the mid-1850's the British government signed contracts with both Robbins & Lawrence of Windsor, Vermont and the Ames Company in Massachusetts for the machine tools to manufacture fully interchangeable P-53 Enfields.
Those machine tools were shipped to Enfield Lock, England and installed in the Enfield Armory. The British government also hired James Burton, the former Acting Master Armorer of Harpers Ferry as Superintendent of the Enfield Armory. His job was not only to "set up" the machinery but to teach the British workmen how to manufacture fully interchangeable Enfields. Burton specifically hired Americans, former machinists from either Harpers Ferry or Springfield, to help him teach the British workmen in the techniques of fully interchangeable, 1st Quality, of P-53 Enfields.
After the Enfield Armory was fully set up and producing 1,000 plus high quality, fully interchangeable P-53 Enfields per month, Burton resigned his post in 1860 and returned to his native Virginia. In the years following Burton became Superintendent of all Confederate Armories
At the same time the government was setting up the Enfield Armory, a private company, the London Armoury Company was organized in London and also imported American machinery to produce 1st Quality, fully interchangeable P-53 Enfields. Although the LACo had contracts with the British Ordnance Department that took the majority of their production, beginning in 1861 they began supplying P-53 Enfields to the Confederacy.
At the beginning of the Civil War, the Federal government issued 20 plus contracts for the standard issue Model 1861 Rifle-Muskets. A provision in each contract was that ALL of the arms produced had to have fully interchangeable parts! So, in effect you had something like 20 odd contractors producing arms that were fully interchangeable with each other!!
Everyone recognized the Spencer Rifles and Carbines as a "technological break through" and when the Spencer Company could not manufacture enough Spencer arms, the Burnside Rifle Company was contracted to also produce Spencers-which the company did and very successfully. Of course, all of their Spencers were fully interchangeable with those made at the Spencer factory in Boston.
John Hall was a genius and our modern world could not exist without the mass production techniques using"interchangeable parts." Just think how much an automobile or computer (or anything else) would cost if each and every one was made by hand by a skilled worker!
All My Best
Southron