Mordecai plates

[Jeremy stake]

Anyone have the dimensions of the gunners haversack from the mordecai plates? Any I bring up on line are too grainy.tube pouches are clear to read and I have those dimensions.just need gunners haversack- any info appreciated- I will be hiring amish leatherworker to duplicate, thanks in advance

 

[UCVRelics]

See if this is what you need.

https://books.google.com/books?id=g...rs haversack from the mordecai plates&f=false

 

[Jeremy stake]

Thank you and yes what I need.and after reading this I realize I may have The same description of artillery implements from a copy of ordnance manual at home
I got stuck on plates and forgot word description of artillery manual

 

[Jeremy stake]

Tube pouch is 2" front to back at top.7.25 inches wide. I got a dough rolling pin which is 2 1/4 in diameter.cut it at 7.25 in. Took it to Amish to have them cut it in half circle radius, take an eight of an inch off each side and drill for friction primer holes.this will fill top of tube pouch w/ lanyard being in bottom. And I will then take it to Amish leather worker with plans for both tube pouch and gunners haversack

 

[Jeremy stake]

See if this is what you need.

https://books.google.com/books?id=g4XcbT6OlhQC&pg=PA110&lpg=PA110&dq=gunners+haversack+from+the+mordecai+plates&source=bl&ots=MttW_La3aY&sig=ACfU3U0R9Jx3jplKSt_IBrlnQDt9XyFn-A&hl=en&sa=X&ved=2ahUKEwiu_ZehkJviAhXBV98KHQBmBdwQ6AEwCXoECAgQAQ#v=onepage&q=gunners haversack from the mordecai plates&f=false

Ucvrelics ,Do you have a digital image for the friction primer tube pouch?you're digital image of haversack made a good blown up to scale template courtesy of staples office supply store.if you can post friction primer tube pouch mordecai drawing I will send it to staples copy center_ thank you