lead sources

jackpine

Cadet
Joined
Feb 28, 2010
Location
Minnesota
Were do you all get lead for casting? I may be down to buying cheaper import brand shot for casting my blackpowder projectiles?
 
Old wheel weights, old XRay room wall lining, plumbers lead are all options of you can find them. When that fails both Cabela's in Owatona & Rogers sells lead weights in their fishing section. IIRC around $4.99 a lb.
 
For just about all Civil War era arms, you will get best results from pure lead. If you need something immediately, I'd try a plumbing supply house or a scrap metal dealer. You can also order on Ebay, believe it or not. Most of us in the N-SSA wind up buying in bulk...last year, we put in an order for ~50,000 lbs.
 
I have to agree with Mike ODTP, you really need soft lead for hollow base projectiles. Otherwise the hollow base can't expand into the rifling and accuracy will suffer greatly.

You can, however, get by with a harder lead in a smoothbore, or the various breech loading rifles and carbines.

Jobe
 
I'll be casting .36 round balls, .58 round balls, and .58 minnies. I mentioned non hardened shot( as apposed to hard chilled shot) hoping that the antimony levels would be low enough for giving me good soft minnies. If I buy enough of the softer shot at a time it should be around $1.00 a pound.
 
You can also try gunbroker Jackpine.
It is pretty funny to see the mailman struggle carrying in a small priority flat rate box with 50 lbs of ingots .Makes up for all the light stuff.

Flat sheet lead from an acoustical studio or lead sheet from roofing makes good minnie balls .
Once you start looking for lead you will start finding it .
Divide your spoils as to hardness .
Smoothbore lead can be pretty hard.
 
Back when I started shooting black powder all we had was Dupont, shotguns and larger than .50 we used Fg if you had a little harder bullets we would increase the charge or go to FFg and usually the faster powder would expand the bullet enough to give good accuracy. Still having some Dupont I am not very familiar witu the modern black powder, but think it would do the same.
 
I do not understand why someone has not mentioned scrap metal yards!

I have two on the way home from work in my area that I can stop in and get discarded wheel weights, flattened/discarded roof vents made of pure lead, old lead pipe plumbing from old houses, lead sheeting from X-RAY labs...

Scrap yards are a great source of lead of all kinds.

Kevin Dally
 
You could also try a local plumbing supply co. or old plumbers, garage sales are some times a place to look. I am a retired electrician and wish I would of collected more lead jacketed cable we scrapped out.
 

Learn About Us
►About CivilWarTalk
►Contact the Webmaster
►Meet the Staff
►Link to CivilWarTalk
Join Our Community
►Register
►Browse Forums
►View Today's Discussions
►Search the Forum
Get Help
►FAQ
►Student Guide
►Forum Rules & Etiquette
►Copyright / DMCA

     Contact Us CivilwarTalk on Facebook CivilWarTalk on YouTube CivilWarTalk on Twitter RSS Feed

Bringing the American Civil War and More to Life.
© 1999 - , CIVILWARTALK, LLC - Site Version 10.0

SlaveryTalk.com - SecessionTalk.com - CivilWarTalk.com - ReconstructionTalk.com
Back
Top