Tell me more! Questions on Tiffany & co wristbreaker

Cato3rd

Corporal
Joined
Feb 7, 2023
Alright edged weapons enthusiasts, I need your help. I picked this saber up on fb marketplace for very cheap near Annapolis, MD and I'm not entirely sure what it is. I'm not a sword/saber collector but took a chance on it because of the price.

Marks: On the riccaso it's marked "star/TC" and "Tiffany & co". On the spine is marked "RM&SB". I know from doing some research that it looks like a Tiffany type 1 blade like the p1821 cav sabers they were contracted to make with the marks and unstopped fuller. But it has a brass (reddish-copper) m1840(?) guard that I don't believe belongs to the blade. No marks (as far as I can tell) on the guard or pommel.

Measurements: blade length is 35 and 1/4 inches. Overall length is about 41 inches

Questions: What is it? Did Tiffany assemble that blade with that guard or has it been rehilted? Would this be a wartime fix or something later on? Would it be worth restoring or just leaving as is?

Any information/insight you guys could tell me I would greatly appreciate it. Thank you for your time and help.
-Cato

IMG_4796.webp


IMG_4772.webp


IMG_4770.webp


IMG_4781.webp


IMG_4797.webp


IMG_4786.webp
 
I believe you have correctly identified the blade, it is from a Tiffany British Pattern 1821 Enlisted Saber, Type 1. The R.M. & S.B. Stands for Robert Mole and Sons, Birmingham, which, of course, is Birmingham, England. The fuller is unstopped, which, if I recall correctly, is a sign of British manufacture. Thillmann also shows two examples of a Type 2 British Pattern 1821 saber. One of these has a stopped fuller and the other has what I have seen referred to as a semi-stopped fuller. Both of these are believed to be of German manufacture. The blade also ends in a typical British spear point.

The hilt is from a model 1840 cavalry saber and does not belong with the blade. The grip is made of a wood core wrapped in cord, then covered in leather and once again wrapped with twisted brass wire. This suggests that the hilt may have been removed from a saber imported from Solingen, Germany. Which maker? The best part to zero in on is the reinforcing bar along the knuckle bow between where it branches off and where it meets the pommel. It would be more helpful to compare the mystery hilt with actual sword hilts, but at the moment I can only compare photos. One possible candidate is the brass hilted Model 1840 made by P.D. Luneschloss & Companie. Another might be F. Potter, but the photos I am using are not clear enough to tell. A third possibility would be Schnitzler & Kirschbaum (S&K). In fact, that one's looking pretty good.

Now when were they married together. My answer is, a long time ago. It could have been during the war. Both blade and hilt would be from early war weapons. But it could also have been done post war to sell a souvenir. If it was done during the war it could have been fashioned by either side from parts picked up off a battlefield.

As far as restoration, my preference would be to leave it as is, but I don't think restoring the grip would be a bad thing.

My usual disclaimer: I'm not an expert so you may want to hear from others. I do like your sword, though.
 

Learn About Us
►About CivilWarTalk
►Contact the Webmaster
►Meet the Staff
►Link to CivilWarTalk
Join Our Community
►Register
►Browse Forums
►View Today's Discussions
►Search the Forum
Get Help
►FAQ
►Student Guide
►Forum Rules & Etiquette
►Copyright / DMCA

     Contact Us CivilwarTalk on Facebook CivilWarTalk on YouTube CivilWarTalk on Twitter RSS Feed

Bringing the American Civil War and More to Life.
© 1999 - , CIVILWARTALK, LLC - Site Version 10.0

SlaveryTalk.com - SecessionTalk.com - CivilWarTalk.com - ReconstructionTalk.com
Back
Top